What Are The Key Points For Auto Parts Replacement?

Auto parts replacement points:

First, try to use sealant, if necessary, paint can be used to achieve the ideal sealing effect;

Second, the rubber seal should be carefully inspected for appearance quality before assembly; use special tools to press fit to avoid knocking deformation;

Third, fill the lubricating grease according to the regulations, and regularly clean the venting holes and check valves;

Fourth, the assembly is carried out under extremely clean conditions, and the working surface of the parts is free from bumps, scratches, burrs and other attachments;

Fifth, strict operating procedures, the seals should be properly installed to prevent deformation in place;

Sixth, master the performance specifications and use requirements of the seals, and replace the failed parts in time;

Seventh, for the thin-walled parts of the side cover, the sheet metal is used for cold correction; the shaft hole parts that are easy to wear can be metal sprayed, welded, glued, machined, etc. to achieve the original size;

Eighth, the nut slide wire breaks loose, should be repaired or replaced with new parts, and screwed to the specified torque.

We are a supplier of auto parts, we have a lot of auto parts available for you, such as: Chevrolet Brake Disc, Cooling fan assy and other auto parts, if you want to know more information, you can contact us, we will provide you with reasonable CHEVROLET Timing Belt Price.