Copyright © Shindary Automotive Parts Co., Ltd. All Rights Reserved
Medical protective clothing wearing instructions
Medical Protective Clothing
1. The protective clothing must be inspected and checked for air pressure to ensure that there are no defects, and the protective clothing must be selected according to the application.
2. However, it is necessary to apply anti-fog agent to the goggles of protective clothing in accordance with the recommended instructions.
3. Choose two people "cooperative organization", that is, when wearing protective clothing, another person to help.
4. Underwear should be worn in protective clothing, at least, it is recommended to wear long sleeves and trousers, or long "underwear". Should consider wearing refractory underwear.
5. Remove personal items that may damage protective clothing, such as pens, badges, and jewelry.
6. Take off your shoes (this step can be omitted when wearing a protective suit with long rubber boots). Some long boots are not allowed to be worn outdoors.
7. Roll the trouser legs into stockings so that you can easily put on the trouser legs and long boots of protective clothing.
8. If a self-contained air breathing apparatus is used, check and install the equipment, complete all connections, and adjust according to the manufacturer's requirements. Do not wear a mask unless requested by the breathing apparatus.
9. If using a snorkel air supply system, check and complete all connections and commissioning. Do not wear a mask unless requested by the breathing device.
10. Sit and put both legs in protective clothing.
11. Put both feet in the coat boot and pull down the splash guard on the boot. (Note: Work boots should be 1 to 2 larger than the usual boots, so that there is enough space to put the boots of the protective clothing protective sleeve into the boots.)
12. Open the air supply device, put on the mask, and make sure that the air supply system is working properly.
13. Stand up and tie the inner belt, if any.
14. Put the arm and head into the protective clothing, close the zipper, and then close the zipper to cover.
15. Ask the assistant to check whether the zipper and zipper cover are fully tightened, whether the view of the mask is clear, whether all air lines are tightly connected, and whether the protective clothing is in the best working condition.
Our company has Medical Protective Clothing for sale, please contact us.
Shindary Automotive Parts Co., Ltd.