Home >> News

How to Disassemble the Car Wiper Assembly?

Jun. 15, 2020

As a Zotye Linkage Assy Manufacturer, share with you.

Traffic accidents are most likely to occur in heavy rain. Heavy rain weather wipers play a very important role, but many car owners tend to ignore it. Traffic accidents often occur due to aging of wiper blades, which leads to unclear vision. Therefore, we must regularly replace our car wipers. How to replace car wipers is a knowledge that many driver friends need to learn. However, many people do not know how to disassemble and install the car wiper. The following  will take you to understand how to disassemble the car wiper assembly. This is a small knowledge of vehicle maintenance.

Zotye Linkage Assy

Zotye Linkage Assy

1. Remove the black shield with a small flat-blade screwdriver, and lift it upward to remove it. After removing, the fixing nut will be exposed.

2. Remove the nut with a wrench. The wiper bracket is fixed on this shaft. Use a small spudger to slightly tilt up. For all activities, you can remove the wiper bracket. Two brackets, disassembly method same.

3. After removing the bracket, open the engine cover, use a casing wrench to remove the two plastic nuts; in this way, you can remove the first black plastic shield, which is the entire shield with the crowbar tool.

4. This shield can be picked up, but it cannot be eaten for the time being, because it has two sprinklers attached to the back; it only needs to be flipped open, and it does not need to be completely removed. Next, remove the nuts in the picture below. There are a total of 5 pieces. This board can be completely removed. After removal, the wiper assembly behind is exposed.

5. The wiper blade is fixed with two hexagon nuts, removed, and moved outward in front of the front of the car. Be careful and you can take off the assembly. Remember to unplug the plug near the motor before removing it. At this point, the old wiper is removed, and then the new assembly is replaced according to the original position, and the nut is locked.

6. Reinstall the two plastic covers, the wiper bracket, and the cable plug.

Our company has Zotye Linkage Assy for sale, please contact us.


Shindary Automotive Parts Co., Ltd.

  • Add.: Rm.11-12, 4th Tower, Daya Jinkai Int'l Plaza, No.1230, Jinkai Ave., New North Zone, Chongqing, China.
  • Tel.: +86 23 6305 1623
  • Fax: +86 23 6320 5611
  • E-mail: overseas@shindary.com
  • Skype:
NEW ITEMS
New Product Alerts
+86 15823303378
+86 13969743028
CONTACT US
Top