How to Change the Inner Handle When it is Broken?

In daily driving, we still need to maintain the vehicle, otherwise we will easily have problems when we drive out, which will also affect our driving mood. It is definitely not advisable. For some small parts replacement, we ourselves.  It can be solved by hands. As a Chana Head Lamp Expoter China, share with you.

Chana Inner Handle

How to change the door handle when it is broken?

1.First unlock the central control button

2. Use a flat-blade screwdriver to pry off the screw cover (just behind the handle, pull up the pull with your left hand, and use a flat-blade screwdriver to pry with your right hand), and remove the screw counterclockwise with a Phillips screwdriver.

3. Use a flat-blade screwdriver to remove the handle decoration shell and the screws inside.

4. Remove the door trim, first use a flat-blade screwdriver to pry up the door, and use a Phillips screwdriver to make the gap, find the door trim clip, there are multiple clips, and pry them off one by one. Then put a screwdriver between the door frame and the clip and pry it hard. Then lift the door trim up, and there is a glass inner bead above the door trim that is stuck on the door trim, and then hung on the door. This action is to pull it out. Be careful not to break the speaker wire with excessive force. If it is not easy to get down, grab the bottom of the door trim with two hands and shake it up and down alternately.

5. Remove the door trim and you will see 3 wires: an inner pull wire, a small speaker wire, and a door and window controller wire. First remove the small speaker wire. Observe the speaker plug carefully, press the elastic buckle on the plug firmly, and pull the plug downward. Next, remove the inner pull cord. The specific steps are to grasp the place close to the fixed place of the cable with your hand, and push the damaged handle down with your thumb until the cable jumps out. The last step: grasp the door and window controller on the inside of the door trim panel and push the entire controller upwards, then observe the plug, press the elastic buckle on the plug firmly and pull the plug downward.

6. The door trim is easier to remove. Use a Phillips screwdriver to remove, just 4 screws, no need to pay attention to the order. Remove the damaged handle, and then remove the small speaker. Use a flat-blade screwdriver to carefully pry out the speaker. The small speaker is very fragile, it is impossible to break the handle clip, anyway, I have to replace it.

Our company also has Chana Inner Handle on sale, welcome to contact us.