Four Maintenance Methods For Car Shock Absorber

In order to quickly attenuate the vibration of the frame and the body, and improve the ride comfort and comfort of the car, the car suspension absorber is generally installed on the car suspension system. Currently, the Car Shock Absorber is widely used in the car.

Shock absorber is a fragile accessory in the process of using the car. The shock absorber works well and will directly affect the stability of the car and the life of other parts. Therefore, we should make the shock absorber always in good working condition. The following methods can be used to verify that the shock absorber is working well.

1. Let the car stop after driving for 10km on the road with poor road conditions, and touch the shock absorber casing by hand. If it is not hot enough, there is no resistance inside the shock absorber, and the shock absorber does not work. At this point, you can add the appropriate lubricant, and then test, if the shell is hot, the shock absorber inside the lack of oil, should be added enough oil, otherwise the shock absorber failure.

2. Press the bumper hard and release it. If the car has 2~3 jumps, the shock absorber works well.

3. When the car is driving slowly and braking urgently, if the car vibration is severe, it indicates that there is a problem with the shock absorber.

4. Remove the shock absorber and erect it, and clamp the lower end connecting ring on the vise. Pull the damping rod several times. At this time, there should be stable resistance. The resistance to pull up should be greater than when pressing down. Resistance, such as unstable resistance or no resistance, may be due to lack of oil inside the shock absorber or damage to the valve parts, which should be repaired or replaced.

We have car shock absorbers of various brands, of which DFSK Shock Absorber is one of them. We also have the Dongfeng Clutch Plate available, contact us for more information.