Brake Failure Self-help Method

Brake failure at high speeds Although the chances of occurrence in daily driving are very small, if it is handled improperly, it will have very serious consequences. Therefore, it is necessary to master some emergency braking measures in advance. As a GEELY Front Bumper Supplier China, let us explain to you.

There are three main reasons for brake failure:

1. Lack of necessary maintenance on the brake system, too many impurities in the brake master cylinder, poor sealing, failure of the vacuum booster pump, dirty brake fluid or a mixture of several brake fluids, heat resistance, brake master cylinder or sub-pump Air leakage, gas storage tank or pipeline interface leaks.

2. Failure of the machine due to improper operation, such as long downhill slope will cause friction of the brake pad, carbonization of the brake hub, and complete failure of the brake function.

3. Due to the serious overload, under the action of gravity acceleration, the vehicle's motion inertia is increased, which directly leads to brake failure.

Hand brake

After the brake fails, the brake can be used to brake. The correct method is to slowly pull up the handbrake, and then tighten, loosen, tighten, and loosen several times to stop the vehicle. It should be noted that when the handle of the handle brake is pulled into the safety button of the hand brake handle, the hand brake handle can be operated freely during the process of tightening and relaxing, and the hand brake is prevented from being locked when the brake is tightened.

Downshift brake

The manual transmission can also slow down by forced downshift. The specific method is to directly hang into the 2nd gear, then loosen the throttle to lift the clutch. At this time, the vehicle will feel like a sudden brake, and then wait for the machine to hang into the first gear. The switch can be turned off, and the vehicle is stopped by the action of the engine cylinder compression.

If there is a brake failure in some dangerous sections such as downhill slopes, in order to prevent the danger from further expanding, if necessary, roadside mud piles, haystacks, road ditch, woods, rocks, and other obstacles can be used to stop the vehicle resistance.

If you would like to know more about Chevrolet Rear Right Brake Cylinder, please follow us on our website or contact us. https://www.shindary.com